Site Feedback  |  Login  |  Terms of Use  |  Search:
Story/Technical Portrait Image

MastGate   Total Page Hits: 2290

Post Type: Technical/Project

Boat Part: Mast

Date Modified: 07/24/2017 2:21 PM


The original flared mast slot opening was easily closed with a hammer and 2 x 4. I cut a new opening with a Dremel tool, following the instructions and video on the Mastgate web site. I had to bend the flanges of the new gate slightly for a good fit. This was easily done. Their phone support is excellent!


Post Image
Post Image
Post Image
Post Image